Skip to content
CalcBrisk RSS

Math · Calculator

Percentage Calculator — % of, Change & Discount

Free percentage calculator: find X% of a number, what percent one number is of another, percent change, increases and discounts — with the formula shown.

Percentage Calculator

Find a percentage of a number, work out what percent one number is of another, measure a percent change, or apply an increase or a discount. Pick a calculation, type two numbers, and the answer updates as you type — with the formula filled in using your numbers.

15% of 240 is
36
How it is calculated
240 × 15 ÷ 100 = 36

A percentage is a fraction of 100: 15% means 15 out of every 100. Percent change is always measured against the starting value, so going from 200 to 250 is a 25% increase, but going back from 250 to 200 is a 20% decrease. What percent one number is of zero is not defined — there is no whole to compare against — and percent change from a starting value of 0 is not defined either. A percentage of 0, though, is simply 0: 15% of 0 is 0.

How to Use This Calculator

Pick one of the five calculations from the drop-down at the top of the calculator, then type in the two numbers. The answer updates as you type — there is no button to press. Under the answer you will see the formula with your own numbers filled in, so you can check the working at a glance.

Each mode loads an example to start with. If a calculation has no answer — what percent one number is of zero, or a percent change from zero — the calculator says so instead of showing a misleading number. A percentage of zero, on the other hand, is simply zero: 15% of 0 is 0.

What Is a Percentage?

A percentage is a number or ratio expressed as a fraction of 100. The word comes from the Latin per centum, meaning “by the hundred”, and the symbol is %. So 15% means 15 out of every 100 — the same as the decimal 0.15 and the fraction 15/100.

Percentages put amounts of different sizes on the same scale. That 36 out of 240 students passed a test is hard to compare with 45 out of 300 in another class, but 15% in both cases makes the comparison immediate. That is why percentages show up in sales, taxes, interest rates, and grades.

Three quantities are involved in any basic percentage problem: the percentage itself, the whole (the base value the percentage applies to), and the part (the result). When the calculation is defined and the result is unique, knowing any two lets you find the third — but not always: if the percentage is 0% and the part is 0, the whole cannot be recovered (0% of anything is 0), and if both the part and the whole are 0, the percentage cannot be determined (it would mean dividing by zero).

The Five Calculations

What is X% of Y?

The formula is Y × X ÷ 100. To find 15% of 240: 240 × 15 ÷ 100 = 36. Use this mode for tips, tax, and commission: a 20% tip on a $64 meal is $12.80, and 8% sales tax on a $125 item is $10.

X is what % of Y?

Here you know the part and the whole and want the percentage. The formula is X ÷ Y × 100: 36 is 15% of 240. Use this mode for grades: a score of 27 out of 30 on a quiz is 90%.

Percent change from A to B

Percent change measures how much a value moved relative to where it started. The formula is (new value − old value) ÷ |old value| × 100 — divide by the absolute value of the old value. A positive answer is an increase; a negative answer is a decrease. From 200 to 250: (250 − 200) ÷ 200 × 100 = 25%. From 250 back to 200: (200 − 250) ÷ 250 × 100 = −20%. The gap is 50 in both cases, but the starting value — the denominator — is different each time. Always divide by the absolute value of the old value, never the new one. That absolute value matters when the starting value is negative: from −10 to −5, the value rose by 5, and 5 ÷ 10 × 100 = 50%, an increase.

Increase Y by X%

To raise a value by a percentage, multiply it by 1 plus the percentage as a decimal: Y × (1 + X ÷ 100). Increasing 80 by 20% gives 80 × 1.20 = 96. A price of $500 raised by 10% becomes $550. Use this mode for pay rises: a salary of $3,000 with a 5% raise becomes $3,150. Note that this mode scales the magnitude of the value: increasing a negative value makes it more negative — increasing −80 by 20% gives −96, whose percent change is −20%.

Decrease Y by X% (discount)

To lower a value by a percentage, multiply it by 1 minus the percentage as a decimal: Y × (1 − X ÷ 100). Decreasing 80 by 20% gives 80 × 0.80 = 64. A $500 item with 10% off costs $450, so you save $50. A jacket marked down 30% from $60 costs $42. Note that this mode scales the magnitude of the value: decreasing a negative value moves it toward zero — decreasing −80 by 20% gives −64, whose percent change is +20%.

Common Uses

Discounts are the everyday case. Shops quote the percentage off, but what matters is the final price, and the calculator shows both the price and how much you save. For a 25% discount on $19.99, the price is $14.99, a saving of $5.00.

Tips work the same way in reverse. A 15% tip on a $48 bill is $7.20, and a 20% tip is $9.60. If you want the total including the tip, use the increase mode: $48 increased by 20% is $57.60.

Grades are a percentage-of-whole problem. A score of 17 out of 20 is 85%. If a test is worth 40 marks and you need 60% to pass, you need 24 marks.

Percent change in prices is how inflation, investment returns, and sales growth are usually reported. If a share price moves from $40 to $46, that is 15% growth. If it then falls back to $40, that is about −13%, not −15% — again, because the starting value changed.

Percentage Points vs Percent

Percentage points measure the plain difference between two percentages; percent measures the relative change. This matters most with interest rates and any figure that is already a percentage.

If a savings rate rises from 4% to 6%, it rose by 2 percentage points (6 − 4 = 2). But relative to where it started, that is a 50% increase: (6 − 4) ÷ 4 × 100 = 50%. Both statements are true; they answer different questions. Saying “up 2%” would be wrong — a 2% rise on 4% would only reach 4.08%.

The rule: when the numbers you are comparing are already percentages, use percentage points for the difference and percent for the relative change.

Common Mistakes to Avoid

The first mistake is reversing a change with the same percentage. A price of $100 rises 10% to $110. A 10% cut from $110 is $11, not $10, so the price lands at $99 — not back at $100. The percentage is always applied to its own base, and the base changed. To undo a 10% rise exactly, you need a cut of about 9.09%.

The second mistake is using the wrong base in a percent change. A price that falls from $80 to $60 dropped by $20, and the base is the original $80, so the fall is 25%. Dividing by the new price of $60 would give 33.3%, which is wrong.

The third mistake is adding percentages that apply to different bases. A 20% discount followed by a further 10% discount is not 30% off: the second discount applies to the already-discounted price. On $100, the first cut leaves $80, and 10% off $80 leaves $72 — a total saving of 28%, not 30%.

The fourth mistake is confusing “percent of” with “percent more than”. If a value is 120% of the original, it is 20% more than the original — the extra 100% is the original itself. A result of 150% of last year’s sales means sales grew by 50%, not by 150%.

Frequently asked questions

How do I calculate a percentage of a number?

Multiply the number by the percentage divided by 100. For 15% of 240, work out 240 × 15 ÷ 100 = 36. In decimal form, 15% is 0.15, so 240 × 0.15 = 36 gives the same answer.

How do I work out percent change?

Subtract the old value from the new value, divide the result by the absolute value of the old value, and multiply by 100. From 200 to 250: (250 − 200) ÷ 200 × 100 = 25%, an increase. A negative answer means a decrease. The absolute value matters when the starting value is negative: from −10 to −5 is (−5 − (−10)) ÷ 10 × 100 = 50%, an increase. Percent change from a starting value of 0 is not defined, because you cannot divide by zero.

What is the difference between percent and percentage points?

Percentage points measure the plain difference between two percentages, while percent measures the relative change. If a rate rises from 4% to 6%, it rose by 2 percentage points, but that is a 50% increase relative to where it started: (6 − 4) ÷ 4 × 100 = 50%.

How do I calculate a discount price?

Multiply the price by 1 minus the discount as a decimal. For 20% off an $80 item: 80 × (1 − 0.20) = 80 × 0.80 = $64, so you save $16. The same method works for any percentage decrease.

Calculator last reviewed: November 2026. Results are estimates for general information — see the notes in the guide before making a financial or health decision.